Axial Piston Fixed Displacement Motor

ORDER CODE

---

This Order code describes the desired model variant of an axial piston fixed displacement motor.

MF	xx	V		20	x	x	x	xx	xx	xx	xx
1	2	3		4	5	6	7	8	9	10	11

1. Type

MF	Axial piston fixed displacement motor

2. Frame Size

Displament per revollution:
20	33,3 ccm/rev.
22	69,8 ccm/rev.
23	89,0 ccm/rev.

3. Direction of rotation

V	reversible

4. Series:

20	Series 20, with closed loop circuit

5. Dymensation of the input shaft

Dymensation of the input shaft		20	22	23
A	14 theet, 12/14 pitch, f 31,20mm	A	A	A
B	19 theet, 16/32 pitch, f 31,75mm	A	A	A
C	21 theet, 16/32 pitch, f 34,50mm	S	S	A
D	23 theet, 16/32 pitch, f 37,68mm	-	-	A
E	27 theet, 16/32 pitch, f 44,03mm	-	-	A
G	13 theet, 8/16 pitch, f 44,70mm	-		A
I	20 theet, 16/32 pitch, f 32,91mm	A	A	A
J	cone, 1:8 SAE J501, f 41,27mm	-	-	A
K	cone, 1:8 SAE J501, f 31,75mm	A	A	A
L	cylindrical f 34,925mm spring	A	A	A
M	cylindrical f 44,45mm spring	-	-	A

6. Pressure and Inlet Ports A, B

Pressure and Inlet Ports A, B		20	22	23
A	SAE J 518c, code 62, sice 1", 6000 psi	A	S	A
B	SAE J 518c, code 61, sice 1", 5000 psi	A	S	A
C	ISO 6162, DN 25, type II, 40 Mpa	A	S	A

7. Bypass valve

A	without bypass valve (when valve block is used)
B	valve block without bypass valve (standard)

8. Setting of low pressure valve

11	1,1 MPa (standard)
00	without purge reliet valve
-	other charge pressure setting

9. Pressure setting in por A

11	11 MPa
14	14 MPa
35	35 MPa (standard)
42	42 MPa
00	without pressure valve
-	other high pressure setting

10. Pressure setting in port B

11	11 MPa
14	14 MPa
35	35 MPa (standard)
42	42 MPa
00	without pressure valve
-	other high pressure setting

11. Available for request

Determined in factory

according to the special

requirement of the client

Axial piston fixed displacement motor (PDF)